Description of the general configuration parameters of the IBM9729 

The IBM9729 device configuration information is displayed here.
Device specific information like the Workstation/PC serial communication 
port number,the number of installed Laser-Receiver Cards and a 
description of the device is then returned by the proxy agent.



FIELDS::
========

Device Name: 
------------
This is the name of the IBM9729 unit as known by the proxy agent. It
is a Read-Only field.

Device Description: 
-------------------
A brief description of the IBM9729 device that is provided by the 
proxy agent. It is a Read-Only field.

Proxy Agent Name/IP Address: 
----------------------------
The name/IP address of the proxy agent that provides network
management support to the IBM9729 device. It is a Read-Write field.

Workstation/PC Serial Port:
---------------------------
This parameter specifies the RS232 serial communication port of the 
Worksrtation/PC running the SNMP agent to which the IBM9729 device 
is attached.It is a Read-Only field.

Total Cards Installed: 
----------------------
The total number of Laser-Receiver Cards that have been installed 
on the IBM9729 device. It is a Read-Only field.

Device Fiber Card Type:
-----------------------
This parameter specifies the type of fiber card employed by the 9729
device. It takes on one of the strings "Dual fiber with protection 
switching" or "Single fiber only"; thus meaning that the device uses 
the dual fiber card or the single fiber card, respectively. It is a
Read-Only field.

Optical Amplifier Installed:
----------------------------
This parameter specifies if an optical amplifier is installed in
the 9729 device. If an amplifier is installed, the value is YES, else
it is NO.  It is a Read-Only field.


Peer 9729 Device: 
-----------------
The selection name of the peer IBM9729 device to which the unit is  
connected. This value is updated automatically when the IBM9729 dev-
ice is connected to its peer. The  default value is "NONE". It is a 
Read-Only field.



BUTTONS::
=========

OK:
---
This button  closes the dialog  box.

Verify:
-------
This button verifies the information in the dialog box.

Cancel:
-------
Closes the dialog box.

Help:
-----
Displays the help information for the dialog box.

